loading..
3D
360
Gallery

PPHV2039X-Pro

Positive Precision High Voltage
The CFP Model 2039 High Voltage Power Supply is a single-width NIM module designed primarily for use with photomultiplier and electron multiplier tubes. But it can be used with any detector requiring a bias voltage up to +5000 V and a current level of 500μA or less.

Features:

  • Compact single width NIM package
  • Regulated up to +5000 V dc 500µA output for negative and positive separately
  • Noise and ripple ≤10mV peak to peak
  • Overload and short circuit protected Overload, inhibit status indicators Inhibit and overload latching circuits Four digit front panel meter
  • CFP Instrument Control Bus (optional) LAN, USB, RS232, RS485 ICB available

Description:

The CFP Model 2039 High Voltage Power Supply is a single-width NIM module designed primarily for use with photomultiplier and electron multiplier tubes. But it can be used with any detector requiring a bias voltage up to 5000 V and a current level of 500μA or less.
The 2039 allows the user to select from two continuously adjustable outputs, ranging from +15 to +5000 V dc. The output voltage is measured and displayed by a four-digit voltmeter. In addition, this unit allows the user to has fully separately positive and negative output voltage polarity. The 2039 unit are fully arc and short circuit protected and will limit continuous short circuit output current to less than 150% of maximum rated output current.

Electrical and Mechanical Power Required:

  • Typical Power Requirements
    • Standard version +12V - 450mA, -12 V - 450mA
  • Physical
    • Size: Single width NIM module 3.43 X 22.12 cm (1.35 X 8.71 inches) per TID-20893 (rev.) NET
    • Weight: 0.9kg (2.0lbs.) - SHIPPING WEIGHT - 2.2 kg (4.9 lbs.)
  • Accessories Included
    •  LAN, USB, RS232, RS485 cable (opt), PPHV2039D Rev1.0 10015-001
Inputs:
  • Input Power: The Model 2039 is powered from a standard NIM Bin and power supply
  • Inhibit: TTL Logic low or ground inhibits the HV outputs; max logic low ≤0.4V; logic high ≥2.5 V.
 
Outputs:
  • HV Output: +15 to +5000 V dc, continuously adjustable, 500μA output current
 
Indicators:
  • HV Output: 4-digit panel meter 0 to 5000 V.
  • Inhibit: LED indicates Inhibit status.
  • Overload: LED indicates overload status.
 
Controls:
  • ON/OFF: Front panel toggle switch enables or disables output.
  • Voltage: Front panel Multi turn controls switch continuous adjustment of the output voltage.
  • Remote Control: Model 2039 have provisions for remote high voltage output control via an USB port.
Catalog
File Format Positive-Precision-HighVoltage-3KV-1mA-MODEL-2039X-PRO.pdf en 3/4/2017 2:34:52 PM
Mechanical
File Format NIM-MODULE-Mechanical.pdf en 3/4/2017 2:34:32 PM

 

  • بایاس کردن آشکارسازهای نیمه‌هادی
  • بایاس کردن گازی
  • بایاس کردن تیوب گایگر-مولر
  • بایاس کردن لامپ‌های PMT
  • بایاس کردن مبدل‌های التراسونیک
  • مویرگی الکتروفورز (CE)
  • تجزیه و تحلیل سلول
  • تقویت‌کننده الکترون
  • مرتب‌سازی DNA
  • الکتروپوریشن
  • چاک الکترواستاتیک
  • الکتروریسی
  • تست‌های الکترواستاتیک
  • دوربین گاما
  • پمپ یونی
  • طیف‌سنجی جرمی
  • پزشکی هسته‌ای

راه‏ اندازی آزمایشی برای طیف‏سنجی عرض زمانی با استفاده از TSCA:

Experimental Setup for Time Width Spectroscopy using TSCA
 
سیستم زمان‏بندی معمولی برای اندازه‏گیری‏های تصادفی گاما-گاما با TSCA2: 
Typical timing system for gamma-gamma coincidence measurements with 2-TSCA
 
نمودار بلاک تفکیک‏کننده n/Gamma:
n/Gamma Discriminator Block Diagram
 
جداسازی الکترون/آلفا/گاما با شمارنده مناسب:
Electron/Alpha/Gamma Separation with Proportional Counter
 
جداسازی الکترون/آلفا با Phoswitch:
Electron/Alpha Separation with Phoswitch
 
جداسازی پروتون/آلفا با آشکارساز مانع سطحی سیلیکون (SSB):
Alpha/Proton Separation with Silicon Surface Barrier {SSB} detector
 
نمونه دو پارامتر n/Gamma نمودار بلاک تفکیک‏کننده:
Typical 2 parameter n/Gamma Discriminator Block diagram
  • Voltage Regulation
    • Line: ±0.001% of rated output voltage for a +1% input line chang
    • Loade: ±0.001% of rated output voltage for a full load chang
    • Ripplee: See 10mVpp tabl
    • Stabilitye: ≤0.005% per hour, 0.02% per 8 hours, after a ½ hour warm up
  • Temperature
    • Temperature Coefficient: ≤50ppm/°C
    • Operating Temperature: 0°C to +50°C
    • Storage Temperature: -40°C to +85°C
    • Arc/Short Circuit: All units are fully arc and short circuit protected and will limit continuous short circuit output current to less than 150% of maximum rated output current.
  • Other
    • Humidity: 20% to 85% RH, non-condensing
    • Interface Connector: LAN, USB, RS232, Rs485
    • Voltage: Front panel Multi turn control switch continuous adjustment of the output voltage.
    • Output Connector: SHV connector
    • Cooling: Convection cooled

Dimensions:


NIM standard module connector pin assignments (required by DOE/ER-0457T):


Pin# Function Pin# Function Image
1 Reserved [+3 V] 2 Reserved [−3 V]  
3 Spare bus 4 Reserved bus 
5 Coaxial 6  Coaxial
7 Coaxial 8 200 V DC 
9 Spare 10 +6 V 
11  −6 V 12  Reserved bus
13  Spare 14  Spare
15 Reserved  16  +12 V
17 −12 V  18 Spare bus 
19  Reserved bus 20  Spare
21 Spare  22 Reserved 
23 Reserved  24  Reserved
25  Reserved 26  Spare
27  Spare 28  +24 V
29  −24 V 30 Spare bus 
31  Spare 32 Spare 
33  117 V AC (hot) 34  Power return Gnd
35  Reset (scaler) 36 Gate 
37  Reset (aux) 38 Coaxial 
39 Coaxial  40  Coaxial
41 117 V AC (neutral)  42 High-quality Gnd 
G  Gnd guide pin