RTLC2118

Video:

Features:

Extremely high counting rate
One trace scan 25mm x 200mm
Fast, automated and reliable scans
High sensitivity for all radioisotopes
Optional beta probe for PET applications
Variable scan speeds from 0.1 - 60 (mm/sec)
Very high counting rate and dead time correction
Spectroscopic analysis of radiopharmaceutical purity
Supports all data extraction and reanalysis of stored data
Full detector and data acquisition control via application software
Performs thin-layer Chromatography (TLC) using a high-resolution NaI detector
Daily quality control of radiopharmaceuticals used in nuclear medicine procedures
Durable and versatile
Splash resistant design
Wide temperature range
Ready for field operation
Easy system setup and maintenance
Robust and suitable for use in challenging conditions
Easy to use system with maximum flexibility and automatic positioning system
Integrated digital MCA with 4096 channel resolution and automatic decay correction and peak integration

Descriptions:

The RTLC2118 evaluates the radio-chemical purity of specific radio-pharmaceuticals used in nuclear medicine procedures. The integrated digital MCA and the fully programmable motor control result in a system that is readily driven by protocol driven application software. This makes it straightforward to implement the different analysis parameters required by each radio-pharmaceutical or procedure. The RTLC2118 is well suited to the busy Nuclear Medicine Department with many procedures to perform. RTLC2118 comprises a NaI(Tl) detector in the standard package used in SPECT applications and comes with an optional beta detector that makes it suitable for PET applications. The standard software provides a graphical user interface for TLC scan, gamma-ray spectroscopy, detector control, data acquisition, QA and database management. The provided factory programmed protocols may be supplemented by user defined protocols. The protocols provide automatic control of the detector scan, the acquisition as well as graphical display and analysis. QA is assured by the quality control procedure and trending analysis of the QA data as a function of time. The database option supports the extraction and re-analysis of all stored data.

Input(s)

Power

48V (1.25A) AC to DC adaptor

LEMO PC interface

DC +5V LEMO 5 pin (200mA) for PC communication

Output(s)

No output signal

Control(s)

knob

This knob provides the user with manual control over the device slider.

Power Push button

Push to turn device ON and hold for 3 seconds to turn device OFF (long press)

While device ON push key to change mode (short press)

LEMO port

Setting configuration via LEMO 5 pin (A), USB (B) cable (set and read all data)

Indicator(s)

No indicator

Performance

Speed

0.1 – 60mm/sec

Travel length

200mm

Strip size

30mm x 200mm

Collimators

Type1: 0 - 60keV, Width: 2mm

Type2: 60 - 300keV, Width: 3mm

Type3: 300 - 1500keV, Width: 3mm

Detector

NaI(Tl)

40mm x 40mm

PVT( optional)

0.25mm

PMT

14-pin 10-stage PMTs

Data Acquisition and Analysis

Processor

FPGA technology with Arm9, 32 bit 200MHz

OS

Built in Windows 7 or higher versions

Software

RTLC2118 (SOFTWARE)

Measurement/Spectrum

High Voltage

0 - 1500V (DAC 12bit) 0.2mA

Energy channel (selective by admin)

From 0 to 1024keV

From 0 to 2048keV

From 0 to 3072keV

From 0 to 4096keV

Energy calibration

Non-linear empirical function or linear Calibration (polynomial fit)

ROI selection

Radiopharmaceuticals (arbitrary number of RoI)

Impurity (arbitrary number of RoI)

Background (one RoI)

ADC

Channels

12bit in 4096CH @120Mhz FRQ

Conversion time

200nsec with 8.3nsec time interval

Digital Signal Processing

12-bit and 120MHz ADC

Charge sensitive preamplifier gain:10 – 150mV/pC (selectable)

Amplifier coarse gain: (x1 to 150x) in 15 step

Amplifier fine gain: (0 - 2x) in 65536 step

Integration time filter for the energy calculation with software adjustable rise time in the range 0 to 0.546ms @80Mhz in 0-65536 step

Trigger threshold software adjustment (0 to 100% scale) in 1024 step

Software fine tuning of the Pole-Zero cancellation

Software gain stabilization

Pile-up rejection and live time correction

Baseline restorer with programmable averaging

Catalog

01. RTLC2118_catalog.pdf

en

12/20/2020 3:11:20 PM

01. RTLC2118_persian catalog.pdf

fa

12/20/2020 3:11:27 PM

Nuclear medicine
Routine quality control of radiopharmaceuticals containing ⁶⁸Ga,¹⁷⁷Lu,⁹⁰Y, ¹⁸F,^99mTc, ¹²³I and other
Radiochemical purity measurements
Online inspection
PET and SPECT quality control
Quantitative and qualitative analysis of radioactive compounds
Development and completion of the chromatographic process
Radio scanning and documentation
Pharmaceutical metabolite analysis

PC Software

RTLC2118 (SOFTWARE): The system includes RTLC2118 software for instrument control and data analysis. Quantitation of peaks is automatically performed and a report showing the method used, chromatogram and different radioactive information is generated. This software provides an easy-to-use interface for RTLC2118 operation and radio-chromatographic analysis, including instrument control, method definition and storage, data acquisition, quantitative analysis and reporting functions.

Figure 1: Experimental setup window where the user can set various test parameters

Figure 2: Data acquisition window displayed when radio chromatography is being performed.

Figure 3: Typical software report where the user can customize the color (color, gray or monochromic)

Input /Output (using RTLC2118 software)

USB

Data Output formats

CSV, TXT, XLS, PDF

Figure 1: Experiment setup window

Figure 2: Data acquisition window

Figure 3: Typical software report

Unit:RTLC2818
Electrical
Power required	Standard version +48V (1.25A) AC to DC adaptor
Physical
Dimensions (L W H)	450 x 230 x 350 cm (L x W x H)
Weight	12.780kg
Mechanical
Storage temperature	0°C to 40°C
Operating temperature	10°C to 45°C
Relative humidity	10 to 80%